Frequently Asked Question
May an Employer Add Other Information Outside the Boundaries of the Alcohol Testing Form?
An employer may add some information outside the boundaries of the DOT Alcohol Testing Form (ATF), but only within limits. Part 40 allows information needed for billing purposes outside the boundaries of the form (49 CFR 40.225(b)(1)). The DOT Office of Drug and Alcohol Policy and Compliance (ODAPC) adds that "For record storage, tracking, and retrieval purposes, the DOT will permit other information, such as barcodes and tracking numbers, to be affixed or printed on the ATF."
Part 40 permits several other changes. An employer may use an ATF with its own name, address and telephone number preprinted, and may include the name, address and telephone number of a consortium or third-party administrator. An ATF may be printed entirely on white paper or on colored paper, and when colors are used, Copy 2 must be green and Copy 3 blue. A breath alcohol technician (BAT) or screening test technician (STT) may add the name of the DOT agency on the Remarks line and may preprint the technician's own contact details, but a signature may not be preprinted (49 CFR 40.225(b)).
Beyond the changes Part 40 lists and the barcode and tracking number allowance ODAPC describes, the ATF may not be modified or revised (49 CFR 40.225(b)). The ATF is a three-part carbonless manifold form that must be used for every DOT alcohol test (49 CFR 40.225(a)). An ATF translated into another language may be used only if ODAPC has approved it and both the employee and the technician understand and can use it (49 CFR 40.225(c)). Using a non-DOT form for a test is a correctable flaw under 49 CFR 40.269(c).
Related FAQ: Is Error Correction Training Required If an Alcohol Test Is Cancelled Due to Equipment Failure?
We are not a law firm. The information on this website is for informational purposes only and may not be up to date. Always consult a licensed attorney for personalized legal advice.